Technical Data

Overview

  • Designed specifically for both FTC and FRC

  • 3mm mounting holes spaced 24mm apart

  • JST-PH 4-pin connector (Connector for REV Robotics Control and Expansion Hubs)

  • VCC input 3.3V - 5V

  • Zero configuration required

  • Active LOW output

    • LED will turn on when the Sense is near a magnetic field and the output is 0V or GND

    • LED will turn off when Sense is NOT near a magnetic field and the output is VCC

  • Do not place Sense near magnetic items that are not meant to trip the sensor, or high current carrying wires, as this could unintentionally trip the sensor.

Electrical Characteristics

ValueMinimumMaximumUnit

VCC

3.3

5

Volts

Current Draw (No magnetic field present)

0.012

0.93

Milliampere

Current Draw (Magnetic field present)

0.93

3.35

Milliampere

Testing Data

PreviousSWYFT SenseNextSetup Guide

Last updated